1 Binderholz Bausysteme GmbH PROCESSING MANUAL BINDERHOLZ CLT BBS
3 Binderholz Bausysteme GmbH Purpose 4 Target group 4 Work preparation project planning 5 Process of AV project planning 6 Presentation of plan 7 Plan issuance 8 Template planning record 9 Edge processing CLT BBS 10 Drillholes 10 Cutouts 11 Break-throughs 12 Pocket milling 13 Cutout angle < 90° 13 Machining tolerances 14 Cutout variants 15 Offset of cutouts 16 Example | checklist for CLT BBS deliveries 17 Loading plans 18 Loading types | truck 19 Loading types | rail 21 Loading types | containers 22 Manipulation | loading 23 Loading guidelines 23 Consignment note - CMR 24 Example of delivery note 25 Manipulation | unloading 26 Unloading 26 Lifting anchor 26 Lifting loop 27 Lifting loops + bolt/thorn 27 Lifting loops for non-visible quality 28 Lifting loops with a thorn 28 Lifting loops double hole 29 Assy/T-lift screws 29 Packages with premounted lifting loops 29 Other lifting options 30 Consequences of usage of wrong lifting systems by the customer 30 Manipulation | storage 31 Intermediate storage at the construction site 31 Assembly | walls on ground floor 32 Checking of the floor plate 32 Bituminous sealing against humidity 32 Setting up the walls 33 Setting of angles 33 Compensation plates for levelling 34 Foot threshold 34 Erection of first wall 35 Erection of second wall 36 Outer wall - inner wall 37 Erection of remaining walls 37 Assembly | ceilings 38 Application of sealing membrane 38 Mounting of the ceiling 38 Second ceiling element 39 Remaining ceiling elements 39 Execution detail: Longitudinal joint of element 40 Execution detail: Longitudinal joint of element in the wall axes I jetty (e.g. balcony) 40 Assembly | walls upper floor 41 Setting up the walls in the first upper floor 41 Setting of angles 41 Assembly | protection 42 Weather protection 42 Temporary construction time sealing 42 Shell construction details 43 - 117 Safety at the construction site 118 Personal protection equipment 118 Fall protection 118 TABLE OF CONTENTS
4 Binderholz Bausysteme GmbH Processing Manual binderholz CLT BBS PURPOSE In this Processing Manual you will find everything you need to know about the further processing of binderholz CLT BBS. The information ensures that skilled personnel can professionally and properly erect solid wood structures even without CLT BBS experience. This Processing Manual and all the details and hints presented in it have been kept as simple as possible. TARGET GROUP The target group of this Processing Manual are all direct processors of binderholz CLT BBS.
5 Binderholz Bausysteme GmbH WORK PREPARATION - PROJECT PLANNING Interfaces from the drawing program Cadwork - Import | Export Processable file formats Import Export Cadwork 3D IFC SAT DXF IFC ACIS BTL RHINO STEP STEP RVT IGES SEMA Viewer Dietrichs HSB DXF DWG PDF The Work Preparation department (AV_Projektierung) prepares the plans for production. All plans that are processed by us are created with the program Cadwork. Cadwork is a 3D CAD/CAM software for the timber construction industry. The following interfaces enable import of data. Depending on the imported file format and the quality of the plans, it calculates the in-house effort and thus the time needed for processing.
6 Binderholz Bausysteme GmbH AV PLAN DESIGN PROCESS - PROJECT PLANNING Customer inquiry Clarification of need by VT Internal processing AV Consultation, if needed, and clarification of details Handover of release plans (EZ, UZ, IFC, HTML) + parts lists Release by customer + clarification of logistics (final delivery details) OR amendment Production Dispatch
7 Binderholz Bausysteme GmbH PLAN PRESENTATION CLT BBS Qualities AB - Residential visible BC - Industrial visible C - Non-visible Wood types Spruce (F), Fir antique (TG), Larch (L), Swiss pine (Z), Douglas fir (D), Pine (K), Mixed conifers (NH) Top layer ESP - Prefabricated single-layer panel EKG - Fingerjointed lamellas MHP - 3-layer solid wood panel Examples F-AB_ESP - Residential visible quality, top layer spruce, single-layer panel F-BC_EKG - Industrial visible quality, top layer spruce, with finger joint Formats CLT BBS 125 - System format panel CLT BBS XL - Large format panel DL = Top layer longitudinal DQ = Top layer transverse Glulam GLT Setup combined (c), homogenous (h) Strength classes GL24, GL28, GL30, GL32 Qualities SI (visible quality), NSI (non-visible quality) Wood types Spruce (FI), Larch (LA) Example BSH GL24c NSI FI (glulam GL24 combined non-visible quality spruce) Presentation of plan The section lining in the cross-section indicates the direction of the lamellas.
8 Binderholz Bausysteme GmbH PLAN ISSUANCE Single-part drawing (EZ) The EZ always shows a single component. Two cross-sections are issued per part, whose position is indicated by the section lines. The viewed side is always the visible side. The single-part drawing is a detailed drawing for production and is primarily not used for customer review or plan release. Overview drawing (UZ) Representation of several components of an entire wall or ceiling or a wall or ceiling section. It serves for plan review and plan release by the customer. Axonometry (AXO) + floor plan The axonometry shows a three-dimensional representation of a floor or a ceiling or roof section incl. component numbers. For each axonometry, the corresponding floor plan is created. Viewed side = Visible side Viewed side = Visible side Overcut rafter sections Axonometry Floor plan Scale 1:65 Scale 1:65
9 Binderholz Bausysteme GmbH Explanation CLIENT PROJECT TITLE model planning record DRAWING TITLE DRAWN BY DATE SHEET NR SCALE first floor ELECTRICAL PLANNING - position of millings to be shown in colour on FF OW 01 FF OW 08 FF OW 07 FF OW 06 FF OW 05 FF OW 04 FF OW 03 FF OW 02 view of wall Glulam 120 x 600 GL 24c visible/non-visible Glulam 120 x 600 GL 28h visible/non-visible BBS XL | 120 | 5s F-AB | NH-C BBS XL | 120 | 5s F-AB | NH-C BBS XL | 120 | 5s F-AB | NH-C BBS XL | 120 | 5s F-AB | NH-C BBS XL | 120 | 5s F-AB | NH-C BBS XL | 120 | 5s F-AB | NH-C BBS XL | 120 | 5s F-AB | NH-C F-AB | NH-C BBS XL | 120 | 5s FF IW 02 BBS XL | 120 | 5s F-AB | NH-C FF IW 01 BBS XL | 120 | 5s F-AB | NH-C FF OW 02 FF OW 06 FF OW 04 FF OW 08 FF OW 01 FF OW 03 FF OW 07 FF OW 05 B B A A Section B-B Section A-A B B A A Section B-B Section A-A B B A A Section B-B Section A-A B B A A Section B-B Section A-A B B A A Section B-B Section A-A B B A A Section B-B Section A-A B B A A Section B-B Section A-A B B A A Section B-B Section A-A FF OW 01 FF IW 01 FF IW 02 Section B-B Section A-A A A B B Section A-A B B A A Section B-B starting point of assembly FF floor slab 01 - top view direction of span BBS 125 | 140 | 5s F-AB | NH-C B B A A views of the walls (see explantation) all dimensionings in mm Openings: blue (windows, doors) Glulam: green BBS: brown Subgroup: OW or IW (outer wall, inner wall) Group: FF or SF Milling on near side: light green Milling on back side: grey Drilling: red fon +43.6245.70500 fax +43.6245.70500-7001 www.binderholz.com Binderholz-Bausysteme GmbH Solvay-Halvic-Straße 46 A-5400 Hallein bbs@binderholz.com 1:100 @ A2 1/ 5 18.02.2021 TEMPLATE PLANNING RECORD All information on the individual CLT BBS components in a 2D plan file is required for the targeted processing of the CLT BBS components and the creation of production drawings. In the 2D view drawings of the CLT BBS elements, important additional information such as, e.g., component thickness and CLT BBS structure must be entered in text form.
10 Binderholz Bausysteme GmbH EDGE PROCESSING CLT BBS CLT BBS 125 During longitudinal profiling, CLT BBS 125 is chamfered as a standard on all four longitudinal edges (width of the chamfer is approx. 3 mm) before the cutting process is started. Edges created by machining remain sharp-edged. CLT BBS XL In CLT BBS XL components, the edges are not chamfered. PRESENTATION OF DRILLHOLES Drillholes on the top surface Green drillhole Drillhole extends through the entire strength of the component Red drillhole Drillhole on the viewed side, does NOT extend through the entire strength of the component Dashed drillhole Drillhole on the rear side, does NOT extend through the entire strength of the component Drillholes on the face (Ø 28 mm) - Applies only for CLT BBS XL - Length max. 1300 mm - Manual machining When positioning the drillholes deviations in measurements may occur.
11 Binderholz Bausysteme GmbH PRESENTATION OF CUTOUTS Cutout at 90° to the board surface Non-visible area Cutouts ≥ 100 mm: Corners are overcut Cutouts < 100 mm: Corners are executed with sharp edges (Execution as in visible area) Visible area Cutout bevel to the board surface Non-visible area Visible area Corners are executed with sharp edges Cutouts ≥ 100 mm: Corners are overcut Cutouts < 100 mm: Corners are executed with sharp edges Corners are executed with sharp edges The red line shows the section as it is drawn up in the plans. The images show the actual machining.
12 Binderholz Bausysteme GmbH PRESENTATION OF BREAK-THROUGHS Non-visible area Execution 1 Execution 2 Corners are overcut Cutout is smaller than 200 x 200 mm, but larger than 100 x 100 mm The remaining radius depends on the diameter of the milling cutter which in turn depends on the depth the of processing. Remaining radius of 20 - 40 mm Visible area The red line shows the section as it is drawn up in the plans. The images show the actual machining.
13 Binderholz Bausysteme GmbH PRESENTATION OF POCKET MILLING Non-visible area Visible area Remaining radius stays the same. The remaining radius depends on diameter of the milling cutter which in turn depends on the depth of processing. Remaining radius of 20 - 40 mm. Subject to a surcharge, the corners can be reworked with sharp edges or, upon consultation, milled over. Remaining radius stays the same. The remaining radius depends on diameter of the milling cutter which in turn depends on the depth of processing. Remaining radius of 20 - 40 mm. PRESENTATION OF A CUTOUT WITH AN ANGLE OF < 90° Non-visible area Visible area The red line shows the section as it is drawn up in the plans. The images show the actual machining.
14 Binderholz Bausysteme GmbH MACHINING TOLERANCES Openings Position ± 2 mm Dimension ± 2 mm Drillholes Position ± 2 mm Depth in limited drillings ± 2 mm Millings Position ± 2 mm Dimension ± 2 mm Depth ± 2 mm Slots Position ± 2 mm Dimension ± 2 mm Dimensions of building elements Length ± 2 mm Width ± 2 mm Thickness ± 1 mm Bevel cuts Position ± 2 mm Length ± 2 mm
15 Binderholz Bausysteme GmbH V1 Cutout section remains in the building element and is held merely by the circular saw run-ups (green). PRESENTATION OF CUTOUT VARIANTS Board thickness Minimum cutout dimensions 60 mm 480 x 480 mm 80 mm 550 x 550 mm 100 mm 610 x 610 mm 120 mm 660 x 660 mm 140 mm 700 x 700 mm 160 mm 740 x 740 mm 180 mm 770 x 770 mm 200 mm 800 x 800 mm 220 mm 830 x 830 mm 240 mm 860 x 860 mm 260 mm 880 x 880 mm 280 mm 900 x 900 mm 300 mm 920 x 920 mm 320 mm 940 x 940 mm 340 mm 950 x 950 mm Circular saw run-up remains Cut through (circular saw /chainsaw) V2 Cutout section does NOT remain in the building element. A transport crosspiece reinforces the weakened cross-section of the building element. V3 Cutout section remains in the building element and is held by multiple crosspieces. Board thickness Cutout dimensions 60 - 340 mm min. 200 x 200 mm Board thickness Cutout dimensions 60 - 340 mm min. 550 x 550 mm Crosspiece
16 Binderholz Bausysteme GmbH Cutouts larger than 800 x 800 mm are cut with the circular saw and the chainsaw. This can result in an offset between circular saw and chainsaw of up to 3 mm. OFFSET IN CUTOUTS
17 Binderholz Bausysteme GmbH Customer’s information on unloading, accessways and assembly sequence. EXAMPLE | CHECKLIST FOR CLT BBS DELIVERIES
18 Binderholz Bausysteme GmbH • Loading plans are drafted specifically for the project and the type of loading, separately for container, rail or loading under tarps • The loading plan shows the exact location of the individual packages to the customer • Space optimisation allows for freight reductions • Optimal loading safety can be exactly defined Example for loading in containers LOADING PLANS - schematical portrayal of the loading! - schematische Darstellung der Beladung! - wooden slats below the packages were assumed to be 8 cm high, also the distance between the packages and the opening gate. - Unterleger zwischen jedem Paket wurden 8 cm hoch angenommen, ebenso der Abstand zwischen den Paketen und dem Öffnungstor P 07 P 06 P 03 P 10 P 01 P 02 P 04 P 08 P 05 P 09 P 07 P 06 P 03 P 10 P 01 P 02 P 04 P 08 P 05 P 09 260 cm front side / Vorderseite - Fahrtrichtung / driving direction front side / Vorderseite - Fahrtrichtung / driving direction LKW Plane - Truck closed Project / Projekt: 254265 Veidekke Voldslokka_school_H_Bygget drawn by / Bearbeiter: thofor date / Datum DIN A4 Format sheet no. / Seite LT-01 Lorry no. / Transport Nr. left hand side / linke Seite right hand side / rechte Seite AXO left hand front side / AXO linke vordere Seite AXO right hand rear side / AXO rechte hintere Seite front view / Frontansicht add. information / zus. Informationen 1m 1m 50cm 50cm 50cm 50cm scale: 15.01.2021 1 / 1 typ of transport / Transportart Maöstab: List of packages Liste der Pakete package length width height Paket L�nge Breite H�he (cm) (cm) (cm) 245 cm fon +43.6245.70500 fax +43.6245.70500-7001 www.binderholz.com Binderholz-Bausysteme GmbH Solvay-Halvic-Straöe 46 A-5400 Hallein bbs@binderholz.com P 01 480 240 40 P 02 480 240 40 P 03 260 240 40 P 04 980 240 40 P 05 300 240 60 P 06 300 240 48 P 07 300 240 48 P 08 300 240 42 P 09 300 240 54 P 10 360 240 30
19 Binderholz Bausysteme GmbH Standard open semitrailer • Fast loading and unloading • More loading volume possible TYPES OF LOADING | TRUCK Enclosed truck • If the dimensions of the CLT BBS elements permit it, delivery can be provided in enclosed trucks • Weather protection
20 Binderholz Bausysteme GmbH Packages • Various format sizes such as CLT BBS 125 & CLT BBS XL elements are wrapped separately in foil • Boards of similar dimensions are wrapped in foil to form packages • Intermediate storage of these packages at the construction site is possible • The foil acts as UV and weather protection • Unloading is possible by forklift or crane • Transported in a lying position (exception: loading in containers) Tight up = the boards are stapled on top of each other without intermediate layers • Loading CLT BBS elements directly on top of each other is possible only with the CLT BBS XL format • The whole truck load is wrapped in foil once • Observe weather conditions during unloading • Unloading by means of a crane The final sequence of loading the packages is subject to loading safety rules according to the general road traffic regulations (StVO).
21 Binderholz Bausysteme GmbH • Suitable for long-distance transport • Environmentally friendly • Larger load volumes are possible • Enclosed railway waggon: additional weather protection TYPES OF LOADING | RAIL Open railway waggon Enclosed railway waggon
22 Binderholz Bausysteme GmbH • Overseas • Possible with CLT BBS XL and CLT BBS 125 • Small load volumes are possible • The load is protected from the weather TYPES OF LOADING | CONTAINERS Interior dimensions depend on loading method Truck Type of transport max. width max. length Standard transport < 2,55 m < 13,60 m (with overhang in AT. DE: 15.10 m – precondition: not dividable goods) Special transport without escort 2,55 m - 3,00 m 13,60 m - 18,80 m Special transport with escort 3,01 m - 3,50 m 18,80 m - 21,00 m Standard semitrailer open 2,49 m - 2,55 m 13,40 m - 13, 60 m Mega trailer open 2,49 m - 2,55 m 13,30 m - 13,60 m Rigid truck with trailer 2,49 m - 2,55 m 6,00 m + 7,00 m Steered semitrailer 2,49 m - 2,55 m 12,00 m - 13,60 m Low-loader 2,49 m - 2,55 m 12,00 m - 13,60 m (7,00 m - 9,00 m load area lowered throughout) Inloader < 1,50 m 9,00 m - 9,50 m Tarp < 2,45 m < 13,60 m Container Type of transport max. width max. length Container 40 feet high cube < 2,33 m < 11,90 m Container 40 feet open top - in/out of gauge < 2,34 m < 11,90 m Rail Type of transport max. width max. length Railway wwaggon open < 2,64 m < 21 m Railway waggon closed < 2,84 m < 22 m
23 Binderholz Bausysteme GmbH MANIPULATION | LOADING Execution Transport always in a lying position. Exception: loading in containers Packages wrapped in foil Underlays with anti-slip mats are used between the layers CLT BBS 125 Execution The whole shipment is, or the individual packages, are wrapped in foil Observe weather conditions when unloading Underlays with anti-slip mats are used between the layers CLT BBS XL The final sequence of loading the packages is subject to loading safety rules according to the general road traffic regulations (StVO). CAUTION! - The access road to the construction must be approved for a 40t truck - Check whether the truck can make the trip to the construction site (maneuverability and curve radius) Loading guideline
24 Binderholz Bausysteme GmbH CONSIGNMENT NOTE – CMR The consignment note is an agreement on the contract of carriage in international road freight transport (available for all countries accessible via truck, i.e., all EU countries + Morocco, Russia, Iran etc.) The signatures serve to record the transfer of risk between the parties in writing. To be completed by the haulier Signature of Binderholz Bausysteme Signature of the carrier Date and signature of customer
25 Binderholz Bausysteme GmbH EXAMPLE OF DELIVERY NOTE Zimmerei GmbH Musterstraße 7 Max Mustermann Musterstraße 1 A-1234 Musterdorf A-1234 Musterdorf Rechnungsempfänger Kunde Vertreter Ihre USt-ID-Nr. Unsere USt-ID-Nr. ATU62322711 ATU65952524 11559 5162 LIEFERSCHEIN vom 561607 14.01.21 Nr. rhs zu Auftrag Nr. 254747 254747 LT 01 Spedition Frächtername Lieferung: DAP (Incoterms 2020) A-1234 Musterdorf Bezeichnung Holz Qualität Länge Breite Stärke Stück Menge in BBS 1.250 100 1 10m² 8.000 Profil ohne Profilierung 10000 100% PEFC ZERTIFIZIERT Cert.Nr. HFA-COC-0211 Frachtkosten* 1 1 Kombinationslieferung BBS max. 2,50 m x 13,50 m (BxL), max. 10m³/Auftrag, Zeitfenster für die Anlieferung ca. 3 Tage Zwischensumme Gewicht in kg: 480 Gesamt m³: 1,000 Menge m²: 10 Gelieferte Waren bleiben bis zur Bezahlung unser Eigentum! Holz stammt aus Nutzungen, die den jeweiligen gesetzlichen Vorgaben entsprechen. Wenn nicht anders ausgewiesen, stammen alle Waren aus PEFC kontrollierten Quellen -- HFA–CoC–0211 --. Ausgenommen mit (*) markierte Positionen. Verkauf in Übereinstimmung mit den Anforderungen der europäischen Holzhandelsrichtlinie (EUTR) 995/2010. Ware übernommen Seite 1 / 1 Binderholz Bausysteme GmbH · Brettsperrholz · bbs@binderholz.com · www.binderholz.com Niederlassung Hallein: Solvay-Halvic-Straße 46 · A-5400 Hallein · fon +43 6245 70500-0 · fax +43 6245 70500-7001 Firmensitz: Zillertalstraße 39 · A-6263 Fügen · fon +43 5288 601 · fax +43 5288 601-121 · Eingetragen Landesgericht Innsbruck · FN 275228 y · UID-Nr.: ATU62322711 Muster
26 Binderholz Bausysteme GmbH MANIPULATION | UNLOADING Execution Short-term interim storage of wrapped packages is possible Unloading by crane or forklift Underlays with anti-slip mats are used between the layers Unloading NOTE - Apply according to manufacturer’s instructions and approval of the lifting anchor Lifting anchor Lifting anchor
27 Binderholz Bausysteme GmbH MANIPULATION | UNLOADING Lifting loop Lifting loop NOTE - Apply according to manufacturer`s instructions - Single-use lifting loop for 800 kg lifting load per anchor point if it is designed as a choke hitch Lifting loops + bolt/thorn Lifting loop with a thorn NOTE - Apply according to manufacturer`s instructions - Use: Lifting of ceiling and wall elements - Lifting load: 1000 kg per anchor point 800kg per lifting loop 2000 kg per lifting loop Assembly loop Anchor type Load capacity Choke hitch U-fold parallel 800kg 2000kg Lifting loop Thorn
28 Binderholz Bausysteme GmbH MANIPULATION | UNLOADING Lifting loops for non-visible quality Choke hitch per lifting loop 800 kg Folded over / parallel per lifting loop 2000 kg Lifting loops with a thorn Applicable from a thickness of 80 mm: Top layer lengthwise from a 3-layer setup Top layer traverse from a 5-layer setup Non-visible side Visible side Per lifting loop: 1000 kg
29 Binderholz Bausysteme GmbH MANIPULATION | UNLOADING Lifting loops double hole Assy/T-lift screws Packages with premounted lifting loops - Facilitates faster unloading and immediate lifting of packages at the construction site
30 Binderholz Bausysteme GmbH MANIPULATION | UNLOADING Other lifting options (to be provided by the customer) e.g. Sigha Pick, Pitzl PowerClamp NOTE - Not included in the delivery scope of Binderholz Bausysteme GmbH Consequences of usage of wrong lifting systems by the customer CAUTION! - Grouting due to missing edge protector - Grouting due to too narrow lifting loops GROUTING © Sigha Pick © Pitzl
31 Binderholz Bausysteme GmbH MANIPULATION | STORAGE Intermediate storage at the construction site ≥ 200 mm Schutzfolie CAUTION! - Maintain at least 20 cm distance between the package and solid, dry ground - Make sure to cover up CLT BBS XL elements not wrapped in foil - Practice increased caution in case of visible quality - Make sure to cover rips in the foil with sticky tape Protective foil
32 Binderholz Bausysteme GmbH ASSEMBLY | WALLS GROUND FLOOR Checking of the floor plate Execution Check floor plate together with the master builder (re-measure on site and check the height) Bituminous sealing against humidity Execution Bituminous sealing (scorching) on the finished floor plate (after the drying time) Lay bituminous sealing against humidity according to the manufacturer’s instructions - if appropriate, lay two layers (observe structural physics) LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz.
33 Binderholz Bausysteme GmbH ASSEMBLY | WALLS GROUND FLOOR Setting up the walls Execution Starting out from established reference axes - Tear open longitudinal axes - Determine the angle with a laser measuring device (cross-line laser) Draw lines with a chalk line CHALK LINE Setting of angles Execution Fasten angle bracket on the marked line Maintain angle distance as required by statics LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz.
34 Binderholz Bausysteme GmbH ASSEMBLY | WALLS GROUND FLOOR Compensation plates for levelling Execution Compensation plates - adjust to the height and fixate every 1 m or 0.8 m Apply sufficiently thick layer of expansive mortar between compensation plates along the full width of the wall and exceeding the length on the sides Foot thresholds Options Threshold preassembled by wood construction company Mounting of threshold at the construction site Larch wood threshold and sealing against ascending humidity LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz.
35 Binderholz Bausysteme GmbH ASSEMBLY | WALLS GROUND FLOOR Erection of first wall Execution Set the first wall, adjust to position and ensure true balance Screw on with the pegged angle brackets at the footpoint Fasten with the assembly supports (distance ca. 3 m) A fter that, disattach from the lifting equipment Practice increased caution with visible quality Mounting support Sealing tape LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz.
36 Binderholz Bausysteme GmbH ASSEMBLY | WALLS GROUND FLOOR Erection of second wall Execution Set up the second wall transverse to the first wall, to build a solid corner Establish true balance Screw on with the pegged angle brackets at the footpoint Screw the corner connection together Assembly support Screwed-on corner connection LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz.
37 Binderholz Bausysteme GmbH ASSEMBLY | WALLS GROUND FLOOR Outer wall - inner wall Execution Screw together outer wall with inner wall In case of a blunt joint or tongue & groove joint, insert sealing tape Erection of remaining walls Execution Set up the remaining walls Longitudinal connections should be screwed together using a connection board LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz.
38 Binderholz Bausysteme GmbH ASSEMBLY | CEILINGS Application of sealing tape Execution Attach sealing tape to the narrow sides (faces) of already standing walls Use selfadhesive tapes Avoid fastening them with clamps for reasons of noise protection The sealing plane must be from wall to wall Mounting of the ceiling Execution Place first ceiling element on the already standing walls Screw the ceiling elements onto the walls Mounting a ceiling with a magazine screwdriver LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz. © Getzner
39 Binderholz Bausysteme GmbH ASSEMBLY | CEILINGS Second ceiling element Execution Place second ceiling element and pull it towards the first ceiling element with several beam pulls Screw the ceiling elements together with the walls Connect the longitudinal joint of the elements with a connection board Remaining ceiling elements Execution Connect as with the previous ceiling elements Create fall protection for ceiling notches After setting up the remaining ceiling elements, apply sealing (flame cardboard) (apply according to manufacturer’s instructions) Fall protection LEGAL NOTE All presentations, explanations, dimensions and selected materials are only recommendations and examples provided by binderholz.
40 Binderholz Bausysteme GmbH ASSEMBLY | CEILINGS Execution detail of longitudinal joint of elements Execution If necessary, balance out the ceiling element from underneath Below, raise/lower with assembly support, before screwing on the cover plate Execution detail: Longitudinal joint of elements in the wall axes I jetty (e.g. balcony) Execution Sealing of the longitudinal element connections Noise protection in the interior area Creation of the airtight plane for the outside area
41 Binderholz Bausysteme GmbH ASSEMBLY | WALLS UPPER FLOOR Setting up the walls on the first upper floor Execution Starting out from the established reference axes - Tear up the longitudinal axes - Place angles to measure, using a laser measuring device (cross-line laser) Add chalk lines CHALK LINE Setting of angles Execution Attach angle pieces on the predrawn line Maintain angle distance as required by statics These are binderholz suggestions, hints, examples
42 Binderholz Bausysteme GmbH ASSEMBLY | PROTECTION Weather protection Execution CLT BBS may get wet during the construction phase, but avoid waterlogging Before mounting further layers (e.g. ceiling extension, roof structures), make sure wood moisture is reduced to a maximum of 18% (check with a wood moisture measuring device) Permanently cover narrow areas (end grain) (use binderholz foil from the packages), install windows as fast as possible Caution with surfaces in visible quality: avoid optical defects caused by water stains and dirt pollution Temporary construction time sealing On request, a full-surface temporary construction time sealing can be applied on our CLT BBS elements at the factory. This can be temporarily used during the construction time for up to 4 weeks on ceilings and roofs and can be exposed to the weather (including driving rain and UV light). The processing instructions of the manufacturer of the sealing membrane as well as the binderholz instructions on the temporary construction time sealing, must be observed at any time. For further details, please ask our sales representatives. These are binderholz suggestions, hints, examples © SIGA © SIGA
43 Binderholz Bausysteme GmbH INDEX OF SHELL CONSTRUCTION DETAILS Shell construction details | symbols 44 Foundation - CLT BBS outer wall 46 Foundation - CLT BBS inner wall 50 CLT BBS outer wall - CLT BBS outer wall 52 CLT BBS wall - CLT BBS wall 54 CLT BBS outer wall - CLT BBS inner wall 59 CLT BBS inner wall - CLT BBS inner wall 60 CLT BBS outer wall - CLT BBS ceiling 61 CLT BBS inner wall - CLT BBS ceiling 66 CLT BBS ceiling/roof - CLT BBS ceiling/roof 67 CLT BBS outer wall - CLT BBS roof 71 Rafter solid wood - CLT BBS outer wall 73 Ridge 77 Attika as coating - CLT BBS flat roof 81 BSH girder - CLT BBS outer wall 82 BSH ceiling-level girder - CLT BBS ceiling 86 Steel girder - CLT BBS outer wall 87 Ceiling-level steel girder - CLT BBS ceiling 89 Steel support as suspender beam - CLT BBS ceiling 91 CLT BBS ceiling with a butt joint - CLT BBS inner wall 92 CLT BBS ceiling - wooden frame wall (outer wall) 93 CLT BBS ceiling - wooden frame wall (inner wall) 95 CLT BBS wall - wooden frame wall (outer wall) 96 CLT BBS wall - inserted CLT BBS ledge 98 Stairwell 102 CLT BBS ceiling - brickwall 105 CLT BBS ceiling - concrete wall 108 CLT BBS staircase 115
44 Binderholz Bausysteme GmbH SHELL CONSTRUCTION DETAILS | SYMBOLS Symbol Denomination Function Dimension (Examples) Concrete anchor or screw anchor For fastening on mineral substrate (concrete, stone) Ø 12 x 178 mm Ø 16 x 220 mm Fully threaded screw Selfdrilling screw for wood For the transmission of high tensile forces, e.g. in suspender beams Ø 8 x 140 mm Comb nail For fastening angle connectors, joist hangers, metal plates and for the execution of cross-type screw fittings Ø 4 x 60 mm Wood screw Selfdrilling partially threaded screw for wood Increase of the head pull-through value by means of using washers Ø 6 x 80 mm Ø 8 x 100 mm Ø 8 x 160 mm Washer head screw Selfdrilling partially threaded screw for wood Large screw head for high head pull-through values Ø 8 x 200 mm Ø 10 x 240 mm Ø 10 x 360 mm LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
45 Binderholz Bausysteme GmbH SHELL CONSTRUCTION DETAILS | SYMBOLS Symbol Denomination Function Dimension (Examples) Angle connector For fastening of wooden walls on substrate (wood, reinforced concrete) 100 x 100 mm Perforated metal plate For transmission of tensile forces 80 x 600 mm 3-layer panel For transmission of tensile forces Thickness 19 mm or 27 mm Tie rod Rod for tension connection between a wooden wall and substrate from reinforced concrete Height 540 mm Glue tape To create an airtight plane Recommended for wood-wood connections Width 60 mm Wall barrier from butyl Protection of the wood against ascending moisture Variable width Width 500 mm EPDM sealing tape Sealing to create an airtight plane Fasten with clamps Noise protection bearing Sealing to create an airtight plane Decouples in case of increased requirements for noise protection Colour division in different pressure strengths Application of different bearings depending on actual line load EPDM zigzag band Sealing to create an airtight plane Decouples in case of normal requirements for noise protection Depending on the construction object, specific calculation is recommended Glue Sealing to create an airtight plane PU glues, mounting glue Insulation Mineral wool, cellulose, EPS/XPS LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
46 Binderholz Bausysteme GmbH FOUNDATION - CLT BBS OUTER WALL Variant 1 - without threshold SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
47 Binderholz Bausysteme GmbH FOUNDATION - CLT BBS OUTER WALL Variant 2 - with threshold SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
48 Binderholz Bausysteme GmbH FOUNDATION - CLT BBS OUTER WALL Variant 3 - with concrete base and threshold SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
49 Binderholz Bausysteme GmbH FOUNDATION - CLT BBS OUTER WALL Variant 4 - with concrete base SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
50 Binderholz Bausysteme GmbH FOUNDATION - CLT BBS INNER WALL Variant 1 - without threshold SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
51 Binderholz Bausysteme GmbH FOUNDATION - CLT BBS INNER WALL Variant 2 - with threshold SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
52 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS OUTER WALL Variant 1 - with sealing tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
53 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS OUTER WALL Variant 2 - with glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
54 Binderholz Bausysteme GmbH CLT BBS WALL - CLT BBS WALL Variant 1 - rebate | sealing membrane SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
55 Binderholz Bausysteme GmbH CLT BBS WALL - CLT BBS WALL Variant 2 - tongue | sealing membrane SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
56 Binderholz Bausysteme GmbH CLT BBS WALL - CLT BBS WALL Variant 3 - rebate | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
57 Binderholz Bausysteme GmbH CLT BBS WALL - CLT BBS WALL Variant 4 - tongue | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
58 Binderholz Bausysteme GmbH CLT BBS WALL - CLT BBS WALL Variant 5 - stepped rebate | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
59 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS INNER WALL with sealing tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
60 Binderholz Bausysteme GmbH CLT BBS INNER WALL - CLT BBS INNER WALL with sealing tape | with threshold SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
61 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS CEILING Variant 1 - angle connection SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
62 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS CEILING Variant 2 - perforated metal plate connection SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
63 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS CEILING Variant 3 - solid wood plate SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
64 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS CEILING Variant 4 - continuous outer wall | bearing trimmer beam SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
65 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS CEILING Variant 5 - continuous outer wall | bearing T-square SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
66 Binderholz Bausysteme GmbH CLT BBS INNER WALL - CLT BBS CEILING SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
67 Binderholz Bausysteme GmbH CLT BBS CEILING/ROOF - CLT BBS CEILING/ROOF Variant 1 - rebate | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
68 Binderholz Bausysteme GmbH CLT BBS CEILING/ROOF - CLT BBS CEILING/ROOF Variant 2 - rebate | glue SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
69 Binderholz Bausysteme GmbH CLT BBS CEILING/ROOF - CLT BBS CEILING/ROOF Variant 3 - stepped rebate | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
70 Binderholz Bausysteme GmbH CLT BBS CEILING/ROOF - CEILING/ROOF Variant 4 - screwed crosswise | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
71 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS ROOF Variant 1 - sealing tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
72 Binderholz Bausysteme GmbH CLT BBS OUTER WALL - CLT BBS ROOF Variant 2 - glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
73 Binderholz Bausysteme GmbH SOLID WOOD RAFTER - CLT BBS OUTER WALL Variant 1 - without glue tape CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
74 Binderholz Bausysteme GmbH SOLID WOOD RAFTER - CLT BBS OUTER WALL Variant 2 - with glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
75 Binderholz Bausysteme GmbH SOLID WOOD RAFTER - CLT BBS OUTER WALL Variant 3 - rafter inserted | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
76 Binderholz Bausysteme GmbH SOLID WOOD RAFTER - CLT BBS OUTER WALL Variant 4 - rafter on BSH SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
77 Binderholz Bausysteme GmbH RIDGE Variant 1 - with stringer | sealing tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
78 Binderholz Bausysteme GmbH RIDGE Variant 2 - with stringer | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
79 Binderholz Bausysteme GmbH RIDGE Variant 3 - within stringer | sealing tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
80 Binderholz Bausysteme GmbH RIDGE Variant 4 - within stringer | glue tape SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
81 Binderholz Bausysteme GmbH ATTIKA AS SUSPENDER BEAM - CLT BBS FLAT ROOF SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
82 Binderholz Bausysteme GmbH GIRDER BSH - CLT BBS OUTER WALL Variant 1 - joist hanger CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
83 Binderholz Bausysteme GmbH GIRDER BSH - CLT BBS OUTER WALL Variant 2 - summer CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
84 Binderholz Bausysteme GmbH GIRDER BSH - CLT BBS OUTER WALL Variant 3 - push-in connection CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
85 Binderholz Bausysteme GmbH GIRDER BSH - CLT BBS OUTER WALL Variant 4 - glue tape SEALING CONSTRUCTION For protection of the BSH the BSH front can be completely covered with glue tape. LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
86 Binderholz Bausysteme GmbH CEILING-LEVEL BSH GIRDER - CLT BBS CEILING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
87 Binderholz Bausysteme GmbH STEEL GIRDER - CLT BBS OUTER WALL Variant 1 - with insulation SEALING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
88 Binderholz Bausysteme GmbH STEEL GIRDER - CLT BBS OUTER WALL Variant 2 - BSH support CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
89 Binderholz Bausysteme GmbH CEILING-LEVEL STEEL GIRDER - CLT BBS CEILING Variant 1 - with noise protection SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
90 Binderholz Bausysteme GmbH CEILING-LEVEL STEEL GIRDER - CLT BBS CEILING Variant 2 - CLT BBS milled SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
91 Binderholz Bausysteme GmbH STEEL SUPPORT AS SUSPENDER BEAM - CLT BBS CEILING CONSTRUCTION LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
92 Binderholz Bausysteme GmbH CLT BBS CEILING WITH BUTT JOINT - CLT BBS INNER WALL SEALING CONSTRUCTION increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
93 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS CEILING - WOODEN FRAME WALL (OUTER WALL) Variant 1 - without glue tape increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
94 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS CEILING - WOODEN FRAME WALL (OUTER WALL) Variant 2 - glue tape inside/outside LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
95 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS CEILING - WOODEN FRAME WALL (INNER WALL) increased noise protection requirements lower noise protection requirements LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
96 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS WALL - WOODEN FRAME WALL (OUTER WALL) Variant 1 - sealing tape LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
97 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS WALL - WOODEN FRAME WALL (OUTER WALL) Variant 2 - glue tape inside (in CLT BBS NH-C) LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
98 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS WALL - INSERTED CLT BBS LEDGE Variant 1 - fitted end-to-end LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
99 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS WALL - INSERTED CLT BBS LEDGE Variant 2 - stepped rebate LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
100 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS WALL - INSERTED CLT BBS LEDGE Variant 3 - rebate LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
101 Binderholz Bausysteme GmbH SEALING CONSTRUCTION CLT BBS WALL - INSERTED CLT BBS LEDGE Variant 4 - BSH support LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
102 Binderholz Bausysteme GmbH CONSTRUCTION STAIRWELL Variant 1 - BSH screwed LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
103 Binderholz Bausysteme GmbH CONSTRUCTION STAIRWELL Variant 2 - steel support LEGAL NOTE The presented dimensions (especially connecting means) and symbol images are to be understood as examples and do not replace subject specific or project-specific static and physical calculation.
RkJQdWJsaXNoZXIy NTQ5ODU5