TRANSPORT As standard, CLT BBS flatpack walls are loaded upright using transport racks, which are wrapped in a sustainable water-proof film. If required, the wall elements can also be delivered lying down, grouped together in packages. CLT BBS FLATPACK WALLS INSTALLATION On request, the lifting system specially developed for this purpose can be used for the installation of CLT BBS flatpack walls. It consists of metal U-profiles and is attached to the CLT BBS core of the wall by means of screws at the factory. CLT BBS flatpack walls are industrially prefabricated solid wood walls that offer maximumwall structure flexibility. Single or double-sided, single or double layer, 15 mm or 18 mm planking with drywall, with or without facing shell – you determine the wall structure! Our industrial production system promises high-quality wall elements in combination with sufficient scope for individual planning. Both the width and height of the walls, the positioning and size of openings as well as the position of electrical outlets can be flexibly selected. INDUSTRIAL PRODUCTION The production of CLT BBS flatpack walls is carried out in flow production with several cycles on a specially designed production line. Optimised material cuts, digitised logistics and short distances, lean organisation and quality-assured processes as well as professionally competent and trained employees guarantee consistently high quality of the prefabricated wall elements. CLT BBS flatpack walls are Ü and ÜA label certified. Technical data Width | length max. 3,01 m | max. 11,25 m Cladding type 15 mm | 18 mm Drywall facing shell Thickness Can be combined with all CLT BBS thicknesses (60 - 280 mm) Processing Door and window openings Prerequisites No drywall protruding further than CLT BBS wall Only right angle wall formats Only straight wall joints Drywall tolerances Top element edge ± 2mm Bottom element edge ± 5 mm Left/right element edge ± 5 mm Door and window openings ± 2 mm
RkJQdWJsaXNoZXIy NTQ5ODU5