BINDERHOLZ SOLID WOOD PANEL © ATP/Tom Bause
Solid wood panels have a wide range of applications: From interior fit-out to furniture building to structural timber. They are available as 1-, 3- or 5-ply panels, construction panels and roof construction panels. Particularly in 3-ply form, they impress with their high dimensional stability and accuracy. Their cross-shaped design minimises distortion and guarantees reliable and simple processing. Mechanically and visually graded lamellas provide low-crack panels with a homogenous, premium appearance. Their 3- or 5-ply bonding combines the natural properties of wood with additional stability and durability. binderholz SOLID WOOD PANEL FROM DECORATIVE MICRO CLT CONSTRUCTION PANELS TO INNOVATIVE ROOF CONSTRUCTION BENEFITS • Wide range of applications in interior and covered exterior areas • High stability, compactness and strength at relatively low weight • Made from solid wood • A building material that is easy to process and durable • Flexible design possibilities thanks to various surface and edge finishes • Low cracking tendency • Low distortion tendency - even lamella drying • Breathable and moisture-regulating for a balanced interior climate MAXIMUM DIMENSIONAL STABILITY THANKS TO SPECIAL MIDDLE LAYERS OF THE BINDERHOLZ SOLID WOOD PANEL Our solid wood panels‘ special middle layer lamellas are manufactured from blocks of stacked panels. This creates a particularly dimensionally stable, low-shrinkage and low-distortion, fully enclosed middle layer with exclusively rift and semi-rift oriented growth rings. This manufacturing method significantly contributes to particularly resource-friendly material use along the value creation chain and the consistently high quality of every single panel. © Christof Lackner © FG + SG Architectural Photography
Technical data Bonding tested in accordance with EN 13354 bonding resistant to boiling water CE certification EN13986:2004+A1:2015 Lamella width approx. 110 - 140 mm Quality grading according to EN 13017-1 Cover layer qualities 0, A, B, C+ C, CC (surface not patched) Surface 100 grit sanded on 2 sides Wood moisture content approx. 8 - 9% from the plant Product range Spruce Thicknesses Formats 3-ply panel 12, 16, 19, 22, 27, 32, 40, 42, 50, 60 mm 1.250 x 5.000 mm 1.250 x 6.000 mm 2.050 x 5.000 mm Douglas fir, larch, pine Thicknesses Formats 3-ply panel 19, 22, 27, 40 mm 2,050 x 5,000 mm 1.250 x 5.000 mm Swiss pine, fir Thicknesses Formats 3-ply panel 19 mm 2.050 x 2.500 - 5.000 mm Length depending on raw material availability Spruce Thicknesses Formats 5-ply panel 35, 42, 50, 52 mm 2.050 x 5.000 mm Additional thicknesses, formats and qualities upon request. Separation cuts and custom cuts possible binderholz 3- AND 5-PLY SOLID WOOD PANEL binderholz 3- AND 5-PLY CONSTRUCTION PANEL binderholz‘ 3- and 5-ply construction panels were particularly developed for cladding large areas, both in covered exterior and interior areas. Their technical design and bonding lend this material excellent properties when it comes to bending strength and weather resistance. TIMBER CONSTRUCTION Additional thicknesses, formats and qualities upon request. Separation cuts and custom cuts possible Technical data Bonding tested in accordance with EN 13354 bonding resistant to boiling water CE certification EN13986:2004+A1:2015 Lamella width approx. 110 - 140 mm Quality grading according to EN 13017-1 Cover layer quality B, C+ C, CC (surface not patched) Surface 100 grit sanded on 2 sides Wood moisture content approx. 9 - 10% from the factory Product range Spruce Thicknesses Formats 3-ply panel 12, 16, 19, 22, 27, 32, 40, 42, 50, 60 mm 1.250 x 5.000 mm 1.250 x 6.000 mm 2.050 x 5.000 mm Douglas fir, larch, pine Thicknesses Formats 3-ply panel 19, 22, 27, 40 mm 2.050 x 5.000 mm 1.250 x 5.000 mm Spruce Thicknesses Formats 5-ply panel 35, 42, 50, 52 mm 2.050 x 5.000 mm INTERIOR FIT-OUT, FURNITURE BUILDING The 3- and 5-ply solid wood panel for use in premium interior fit-out and furniture construction. It possesses ideal prerequisites for simple, creative processing and meets all visual and technical requirements. © Schreyer David
binderholz DECORATIVE MICRO CLT The accurate tongue and groove profile with chamfer ensures quick and precise installation. A defect-free middle layer guarantees long-lasting dimensional stability and load-bearing capabilities, a reliable basis for high-quality interior fit-out. Our most common formats of 2.500 x 625 x 19 mm and 1.250 x 625 x 19 mm are available at short notice and contribute to quick project execution. Sustainable five-side cardboard packaging with edge protection protects the panels during transport and storage. Additional formats, thicknesses and wood species can be manufactured upon request, offering additonal planning flexibility. Information on correct screwing can be found in the application video. Decorative micro CLT is suitable for a wide variety of applications in interior fit-out, for example for wall, ceiling and floor solutions. BENEFITS • Circumferential tongue and groove with micro chamfer allows for perfect fitment and joining, facilitating clean laying • Quick and uncomplicated installation saves time at the construction site • Can be cut and processed easily with conventional DIY and wood processing tools • No additional surface work such as coating or plastering required - this saves work and money • Premium solid wood surface provides natural, cosy visuals while being highly resistant to cracking • Contributes to a pleasant and balanced interior climate while • offering flexible design possibilities FOR INTERIOR FIT-OUT AND USE AS STRUCTURAL TIMBER Application video
3-ply decorative micro CLT, top side in visible quality, with circumferential tongue and groove as well as micro chamfer made from spruce, cross-laminated for moisture resistance, sanded on both sides, packed in cardboard, billed on the basis of the top layer TECHNICAL DATA APPLICATIONS • Roof constrution: Saddle, pent and flat roofs • Sub-structure for Attika covering binderholz SOLID WOOD ROOF CONSTRUCTION PANEL binderholz‘ 3-ply solid wood roof construction panel in the format 2.480 x 625 mm offers many advantages in its processing compared to large-format panels. It is characterised by quick installation and easy handling. It can be easily loaded onto small trucks, platform trucks and even estate cars. MANY BENEFITS IN PROCESSING Technical data Wood species Spruce Surface Non-visible quality, 100 grit sanded Cover dimensions 2.480 x 625 mm Thicknesses 22 mm Profile Circumferential tongue and groove with micro chamfer Packaging Cardboard, edge protection, underlays Available immediately from stock Additional formats and panel thicknesses are available upon request Panel thickness Panel format (cover dimensions) Panels per package 19 mm 2.500 x 625 mm 1.250 x 625 mm 48 STOCK FORMATS AVAILABLE AT SHORT NOTICE Panel thickness Panel format (cover dimensions) Panels per package 16 mm 2.500 x 625 mm 1.250 x 625 mm 57 22 mm 2.500 x 625 mm 1.250 x 625 mm 42 27 mm 2.500 x 625 mm 1.250 x 625 mm 34 Additional formats and panel thicknesses are available upon request SPECIAL FORMATS
binderholz 1-PLY SOLID WOOD PANEL Technical data Wood species Spruce, pine* Bonding tested in accordance with EN 13354 bonding resistant to boiling water CE certification EN13986:2004+A1:2015 Panel formats 1.220 x 5.000 mm Panel thicknesses 14, 18, 22, 24, 27, 32, 40, 42, 50, 52 mm Lamella width 40 - 48 mm, full-length lamellas Quality grading ÖNORM B3021, EN 13017-1 Quality Iinterior fit-out Construction A B, BK Surface Sanded on two sides, grit 80 Wood moisture content 10% from the factory * Thicknesses on request Brushed On one or two sides up to a panel width of 2.050 mm Chopped On one or two sides up to a panel width of 2.050 mm Hole distance 16 x 16 mm or 32 x 32 mm with 8 or 10 mm hole Hole drilling SURFACE PROCESSING Upon request SPECIAL PROCESSING for 1-, 3- and multi-ply panels EDGE PROCESSING Processing options Tongue and groove with micro chamfer © Marble Moon Formats and quantities upon request Upon request
Our wide range of multi-ply spruce panels is complemented by 3-ply panels with cover layers from other softwood species and special panels. WOOD SPECIES Antique panel Structure 3-ply spruce Cover layers continuously steamed Formats 2.050 x 5.000 mm Thicknesses 19 mm Benefits Steaming lumber gives the cover layer lamellas a warm, homogenous colour Application Interior fit-out - walls, ceilings, furniture Thermoform panel Structure 3-ply spruce thermally treated Formats 2.050 x 5.000 mm Thicknesses 19 mm Benefits Dimensionally stable with low shrinkage and swelling. Virtually no additional cracking when used in covered exterior areas. Colour coatings last longer. Largely resistant to mould and insect infestation. Durability as per EN 252 - class 2 Application Interior fit-out, covered exterior areas SPECIAL PANELS Nordic Pine Domestic Larch Brushed Spruce White Fir Rift/Semi-Rift Douglas Fir Swiss pine Chopped Design Shape Additional Wood Species Steamed antique wood
Binderholz GmbH · Solid wood panel plant Gewerbegebiet 2 · A-5113 St. Georgen bei Salzburg fon +43 6272 8511 · fax +43 6272 8511-12001 mhp@binderholz.com · www.binderholz.com GB-07-2026 Download BINDERHOLZ SOLID WOOD PANEL SALES | CONTACT mhp@binderholz.com
RkJQdWJsaXNoZXIy NTQ5ODU5