BUILDING PHYSICS 38 Figure 1 – The ceiling test bench in the sound testing lab and arrangement of the measuring instruments Page 6 Figure 2 – Reduction of structure-borne sound Page 7 Figure 3 – On the left, Rothoblaas XYLOFON and on the right, Getzner Sylodyn Page 7 Figure 4 – Schematic diagram of the contributions to the sound transmission in timber construction Page 8 Figure 5 – Difference in the flank sound transmission between CLT BBS 125 and the CLT BBS XL large-format panel sound Page 9 Figure 6 – Facing formwork working with decoupling effect on one or both sides sound Page 10 Figure 7 – Decoupled fasteners with elastomer bearings of different manufacturers Page 10 Figure 8 – Different path of the flank sound transmission in the ceiling area Page 11 Figure 9 – Suspended ceiling with vibration decoupling Page 11 Figure 10 – Illustration of two apartments with apartment partition wall with vibration decoupling Page 12 Figure 11 – Flank sound transmission with CLT BBS 125 elements Page 14 Figure 12 – Optimised apartment partition wall for the prevention of flank sound transmission Page 19 Figure 13 – Exterior wall 22 b Page 26 Figure 14 – Well-being in the interior space Page 27 Figure 15 – Absorption behaviour of different building materials Page 28 Figure 16 – Fire test with direct flame treatment Page 32 Figure 17 – designations for the fire resistance according to ÖNORM 13501-2 (Teibinger and Matzinger, 2013) Page 32 Figure 18 – Test procedure pursuant to EN 13501-1 to test the fire behaviour Page 33 Figure 19 – Smoke-tight butt joint through caulking strip and wooden riser Page 34 Figure 20 – binderholz DC structural analysis program Page 35 Figure 21 – Test of fire stops with Rigips solutions Page 36 Figure 22 – Planning brochure for fire stops in timber construction Page 36 Figure 23 – Rigips classification: Installation of insulated tubes with an annular gap 0-10 mm Page 36 Figure 24 – binderholz processing guideline: Exterior wall-to-ceiling connection detail Page 37 Figure 25 – Preparation for the fire testing of the elastomer bearing Page 37 List of figures
RkJQdWJsaXNoZXIy NTQ5ODU5